Simply clip the alarm unit to the outside of the neckline or place it around your child’s arm with an optional armband accessory (sold separately.
Clip the sensor to the outside of your child’s undergarment, close to the point of urination.
Run the cord under your child’s shirt and insert sensor plug into sensor jack of the alarm unit.
Often parents use diapers with Smart bedwetting alarm as an added precaution to prevent wet and soiled sheets. In case you use diapers, first attach the sensor to the outside of child’s underwear, and then place the diaper over the underwear. Ensure that the sensor is sandwiched between the undergarment and the diaper.
Disconnect the sensor from the alarm unit by removing the sensor plug from the sensor jack.
Smart bedwetting alarm has three settings. Press and release program switch once for sound (only) mode, press and release the program button second time for vibrate (only) mode and press and release for third time for sound & Vibrate mode.
The bedwetting alarm unit will enter standby (power save) mode 10 seconds after the last adjustment is made with the program switch. In standby mode, the program switch is disabled. To select a new alarm, repeat the steps above.